Hotpoint Washing Machine Repairs Error Codes
Hotpoint washing machines are among the foremost common found within the Uk and like all robots, they're going to occasionally breakdown or develop a fault and wish Washing machine repair in Dubai. Being a really popular make means most parts supplier will keep their parts available and since numerous suppliers keep Hotpoint parts stock this also drives competition hence driving down the worth of parts if you ought to ever need them
One problem many of us including some engineers face when faced with a faulty Hotpoint washer is knowing what the error code means, so here are an inventory of error codes and their meanings for Hotpoint washing machines
These error codes can some times have an E ahead of the amount and not an F as shown here, but the meaning of the code remains an equivalent
# F10 - this suggests there's No cold fill. you ought to check and verify that the taps are on or the hoses are kinked.
# F11 - this suggests there's No hot fill. The ambient temperature is perhaps below freezing perhaps thanks to the plumbing becoming frozen. Also, verify that the taps are on or if the drain hoses are kinked.
# F12 - this suggests No mixed fill. it's presumably that the water isn't turned on usually under the sink taps.
# F13 - For this error code you ought to check the water system, inlet control device also as hot and cold hose pipe connections.
# F14 - This error code means a drag with the water heating plant has taken place. you'll get to book a washer
# F15 - Water isn't getting pumped away and a flood situation can happen. Verify that the discharge hose is elevated to the advised minimum height which the pipe isn't blocked.
# F16 - Very high water level Disconnect or close up the water system and confirm that the water level doesn't increase any longer. Then you'll get to find and Book a washer repair engineer
# F17 - Door not closed properly. Close door firmly and therefore the machine should work OK now, if simply closing the door firmly doesn't fix the matter, you'll be got to find and book a washer repairs engineer.
# F20/1 - the particular thermistor resistance has drifted or the temperature scanning sequence is wrong. The ambient temperature might be below freezing. you'll get to Book a washer repair engineer.
# F30/31 - A motor drive problem has occurred. Try running the program again. If the matter persists book a service engineer.
# F40 - Water was below the protection level during a heating step. you'll get to Book a washer repair.
# F41 - The water level detection sequence is wrong. you'll get to Book a washer repair.
# F50/51 - Re-programme needed, the customer language and wash program haven't been saved. The system will run with default conditions (1000rpm max and English language). Book a washer repair to re-program your product.
David may be a washer repairs engineer covering London and Kent, with many yrs of experience. he offers free advice and a reasonable repairs service, you'll get tons more free advice or a coffee cost repairs source by following the link below to our help website.
